| View previous topic :: View next topic |
| Author |
Message |
Turbo
Joined: 12 Jan 2009
Posts: 12
Location: Hilbert, WI
|
 Posted: Wed Mar 03, 2010 11:28 pm Post subject: Sold! |
 |
|
SOLD!!!!!!
Last edited by Turbo on Sat Mar 13, 2010 12:24 am; edited 2 times in total |
|
| Back to top |
|
 |
tdub
Joined: 13 Sep 2007
Posts: 28
Location: Green Bay
|
| Posted: Thu Mar 04, 2010 4:30 pm Post subject: |
|
|
I may be interested in the near future if all things fall into place, I have no idea what a table like this would be worth, so maybe you could PM me what you're thinking you want to get for it..
Thanks.
Tony |
|
| Back to top |
|
|
bryanlouis
Joined: 15 Sep 2005
Posts: 646
Location: Oldmans Wife
|
| Posted: Fri Mar 05, 2010 9:35 am Post subject: |
|
|
When did you buy? Does it have the white side strips on the playing surface or is it the clear strips?
_________________
-Bryan Louis |
|
| Back to top |
|
|
Turbo
Joined: 12 Jan 2009
Posts: 12
Location: Hilbert, WI
|
| Posted: Fri Mar 05, 2010 4:25 pm Post subject: |
|
|
SOLD!!!!!
Last edited by Turbo on Sat Mar 13, 2010 12:25 am; edited 1 time in total |
|
| Back to top |
|
|
BWB
Joined: 03 Jan 2006
Posts: 555
Location: Tin City
|
| Posted: Wed Mar 10, 2010 2:48 pm Post subject: |
|
|
| The new clear side strips are just 3M tape that you can replace the white strips with. I would check the clearance from the bottom of the forwards foot to the playing surface. If you can torque on the rod and touch the surface with the foot, you are going to roof every rollover if you are not used to shooting on that table. This sounds like the same setup (everything new except white strips) as the one Lance owns. Lance's never has had the roof shooting problem and plays pretty dang good. |
|
| Back to top |
|
|
Turbo
Joined: 12 Jan 2009
Posts: 12
Location: Hilbert, WI
|
| Posted: Wed Mar 10, 2010 4:44 pm Post subject: |
|
|
SOLD!!!!
Last edited by Turbo on Sat Mar 13, 2010 12:24 am; edited 1 time in total |
|
| Back to top |
|
|
BWB
Joined: 03 Jan 2006
Posts: 555
Location: Tin City
|
| Posted: Wed Mar 10, 2010 5:20 pm Post subject: |
|
|
Yeah, I'm pretty familiar with what you got there...
So is everyone on this board. Pretty sure everyone can let you know, the rods flex. |
|
| Back to top |
|
|
tdub
Joined: 13 Sep 2007
Posts: 28
Location: Green Bay
|
| Posted: Thu Mar 11, 2010 2:08 pm Post subject: |
|
|
| Did they go with a thinner rod on these new tables? |
|
| Back to top |
|
|
BWB
Joined: 03 Jan 2006
Posts: 555
Location: Tin City
|
| Posted: Thu Mar 11, 2010 2:18 pm Post subject: |
|
|
Thinner rod....No.
Rods that were cheaper and Chinese... Yes.
Rods that bend...Yes.
Thats not the main issue with the new tables, rods can be replaced.
Its that fact that the men are too close to playing surface. If you shoot with any torque the man lifts the ball, either hitting the oppenents rod or the roof of the goal. If you can pull up on the handle and the 3 row middle guy touches the surface, you will have this issue if you shoot a rollover |
|
| Back to top |
|
|
|
